What the Solar Panel Installation Process Looks Like in Practice

by | Oct 1, 2021 | Outdoor

So you might have decided it makes complete sense to create your energy for free. You want to harness the sun’s energy! Yes, there’s an upfront cost, but you get your money back in the long-term, and then some.

Yet, if you are thinking about going solar, you may be curious about what occurs during the solar panel installation. You could even be wondering how to do it yourself?

Before the solar panels on your roof can indeed power your home, there are a few steps that must occur after you sign the solar contract. In this short guide, we will highlight what the solar panel installation process looks like in practice.

Solar Panel Installation Guide

The roof is the most typical site for you to install solar PV panels. The necessary installation requirements are often present on most rooftops. The main idea is to ensure that panels get the most significant amount of sunshine on your solar roof.

You can also install ground solar panels if roof installation isn’t possible. Just ensure nothing is blocking your view of the sun.

Now let’s run through the solar panel installation procedure. We’ll run through installing on a roof, as this is the most common yet trickier installation option.

Set Up the Scaffolding and Mounting System

To begin, you must build scaffolding before installing solar cells. This must be done in a way to keep you while on the roof throughout the installation procedure.

The next step is to install the solar panel mounting system. This will support the solar panels’ foundation. To get the most solar exposure, the entire mounting structure must be slanted at an angle of 18 to 36 degrees.

Now, place the solar panel on the mounting framework after the mounts are in place. To keep it stable, make sure you tighten all of the bolts and nuts.

Connect the Solar Panel’s Wiring

The electrical wiring is the next phase in the installation procedure. People often use MC4 connections since they are compatible with all types of solar panels.

During the wire installation, make sure to turn off the power to the house. Also, remember you are working on your roof, so pay attention to your safety! We know how tricky wiring can be, and you can neglect your surroundings.

Install Your Solar Inverter

Now, you should link your system to the solar inverter. You can install it near the main panel and place it inside or outside. Keep in mind that when you keep inverters in a colder environment, they perform better.

If your inverter is outside, you should protect it from the sun in the afternoon. If you put it inside, the garage or utility room are the best options since they’re cold and have airflow for most of the year.

Next, connect your inverter to your battery. Solar battery storage will help you avoid worrying about a shortage of useable energy on overcast days.

Connect to Your Consumer Unit

All that’s left now is to connect your inverter to your consumer unit. This is so you can monitor how much electricity your solar energy.

As well, you’ll get detailed performance information. This way, you can figure out when you can make the most of the energy your panels produce.

And a final tip, if you don’t think you’re up to the task of installing your own panels, we suggest getting professionals in to do a swift job of it. For example, the guys at Blue Raven in Salt Lake City, Utah, know what they’re doing!

Make Solar Panel Installation Simple

Now that you know the process of solar panel installation, what are you waiting for? We’re all thinking about switching to solar these days to save on bills and become more energy independent. And who knows how much traditional energy costs may arise in the future.

So thanks for stopping by and learning about the solar installation process. If this article was helpful, please check out our blog for similar reads.

Read through our useful guide for more information

Let us get you started with your own self build